F250 & F350 Oil Change (2011+ 6.2L)
Save money by performing your 6.2L Ford F250 & F350 oil change your self. These trucks were made for being serviced quickly in a fleet environment so it is as simple as it gets. To perform an oil change on the 2011+ F250 / F350 when equipped with a 6.7L Powerstroke engine, follow this guide.
Tools Needed:
- 5/8″ SAE or 16mm socket or wrench
- Torque wrench
- Oil filter pliers or wrench
- Oil drain pan with at least 7 quart capacity
- Funnel for new engine oil
- Clean rag
Parts Needed:
As an Amazon Associate I earn from qualifying purchases.
6.2L Ford F250 & F350 Oil Change Procedure:
- Park truck in a safe and level spot
- Warm engine to operating temp to help oil drain easily and quickly
- Check engine oil level on dipstick to verify no issues (low oil or discoloration)
- Remove engine oil fill cap
- Place oil drain pan under the oil pan drain plug
- Remove oil pan drain plug and let oil drain into pan using the 5/8″ SAE or 16mm socket or wrench
- Remove engine oil filter using the oil filter pliers or wrench
- Lubricate engine oil filter o ring with some fresh engine oil and install filter to oil filter housing
- Reinstall and tighten oil drain plug – Torque is 17 lb ft if a torque wrench is available
- Fill with just under 7 quarts of engine oil using oil fill funnel and reinstall engine oil cap
- Start engine to let oil circulate (Check for any leaks or abnormalities while running) and shut engine back down
- Check engine oil level on the dipstick & top off if necessary
This guide is specific for the 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, and 2020 model year Ford F-250 and F-350 model years when equipped with the 6.2L engine.