Hyundai Kona Oil Change (2018+ 2.0L)
Perform your own 2018+ Hyundai Kona oil change to save money and you can be sure it was done right. This article is specific to the 2018, 2019, 2020, and 2021 Hyundai Kona when equipped with the 2.0L engine. To find other Hyundai oil change guides, visit this page.
Tools Needed:
- 17mm wrench
- 17mm socket and torque wrench
- Filter wrench
- Oil fill funnel
- Drain pan with at least 5 qt capacity
- Ramps or a jack with jack stands
- Clean rag
Parts needed:
As an Amazon Associate I earn from qualifying purchases.
Hyundai Kona Oil Change (2.0L) Procedure:
- Warm engine to operating temp
- Check engine oil on dipstick to verify no issues
- Raise front end using ramps or a jack with jack stands
- Loosen the oil pan drain plug using the 17mm wrench and let the engine oil drain into the drain pan
- Remove oil filter (use oil filter wrench if necessary)
- Clean oil drain plug and oil filter mounting surfaces
- Lubricate new oil filter O ring and install
- Reinstall and tighten oil drain plug 30 ft lb using the 17mm socket and torque wrench
- Fill engine with 4 quarts of engine oil with oil fill funnel and reinstall oil fill cap
- Start engine to let oil circulate (Check for any leaks or abnormalities while running) and shut engine back down
- Lower the front end
- Check engine oil with the car level & top off if necessary
