2.0L Jeep Wrangler Oil Change – 2019+ JL
A JL 2.0L Jeep Wrangler oil change costs less if you do it your self, no need to pay for the dealer to do it. This is even easier then other JL engines due to the traditional spin on style oil filter. Follow your service schedule to stay on top of maintenance. Use this guide for the 2019, 2020, and 2021 Jeep Wrangler model years when equipped with the 2.0L engine. For an oil change on a JL Wrangler equipped with the 3.6L engine, follow this alternate guide.
Tools Needed:
- 13mm or 1/2″ socket or wrench
- Oil filter wrench
- Oil drain pan with at least 5 quart capacity
- Funnel
- Clean rag
Parts Needed:
As an Amazon Associate I earn from qualifying purchases.
JL 2.0L Jeep Wrangler Oil Change Procedure:
- Warm engine to operating temp
- Check engine oil on dipstick to verify no issues
- Remove oil drain plug and let oil drain into pan using the 13mm or 1/2″ socket or wrench
- Remove and replace oil filter (next to oil pan) using the oil filter wrench
- Reinstall and tighten oil drain plug
- Fill with 4.5 quarts of engine oil with oil fill funnel and reinstall oil fill cap
- Start engine to let oil circulate (Check for any leaks or abnormalities while running) and shut engine back down
- Check engine oil & top off if necessary (make sure vehicle is on level ground)
- Reset the maintenance reminder
