Ford Bronco Oil Change (2021+ 2.7 Ecoboost)
A complete guide to performing your Ford Bronco oil change. This guide is specific to 2021 & 2022 model year Broncos equipped with the 2.7L Ecoboost engine. It uses a cartridge style oil filter accessed from the top of the engine bay making this oil change simple and easy to keep clean. The 2.7L engine found in other Ford models is very similar so the procedure is also similar however the engine in the bronco holds more engine oil. For more Ford specific guides, visit the Ford section.
Tools Needed:
- 27mm socket and ratchet
- Pick or small flat head screw driver to remove oil filter O ring
- Oil fill Funnel
- 7 quart (or more) capacity oil drain pan
- Clean rag or shop towel
Parts needed:
As an Amazon Associate I earn from qualifying purchases.
- Motorcraft FL2062A engine oil filter or equivalent aftermarket part
- 7 quarts of 5W30 engine oil (7 quart capacity)
2021+ Ford Bronco 2.7L Ecoboost Oil Change Procedure:
- Park in a safe and level spot
- Make sure the engine is warmed up to operating temp
- Raise front end using ramps or jack stands (only if needed)
- Remove engine oil fill cap
- Remove any skid plates needed to access the engine oil pan drain plug
- When equipped with the plastic quarter turn style drain plug, push clip past locking tabs, loosen and remove drain plug
- Drain old engine oil into drain pan and reinstall drain plug when complete
- Remove engine oil filter housing cap using the 27mm socket and ratchet
- Remove oil filter cartridge and replace oil filter cap O ring
- Reinstall oil filter housing cap with filter
- Fill engine with 7 quarts of new engine oil using the funnel
- Reinstall oil fill cap
- Start engine until oil pressure builds and shut back down
- Lower front end from ramps or jack stands (only if it was raised)
- Check engine oil level on dip stick when truck is level and adjust if necessary
- Reinstall any skid plates removed
